Products
Solutions & Success Stories
Corporate
Support
Contact Us
News & Events
Products
Solutions & Success Stories
Corporate
Support
Contact Us
News & Events

Panel/Flush Mount

Panel/Flush Mount

Panel Mount/ Flush Mount


Flush Mount/ Panel Mount is a mounting solution that allows mounting a device into an opening or enclosure. The device is mounted from the front side and secured from the rear side.


Assembly Diagram
Panel PC and Display 5.7" ~ 32"

Assembly Diagram



Panel / Flush Mounting Kit
A set of Panel / Flush Mounting Kit is composed of a clamp and screw.

Panel / Flush Mounting Kit

Winmate Mounting Kit

Size of the Panel PC Mounting Kit (pcs)
5.7" 4
6.5" 4
7" 4
8.4" 8
10.1" 4
10.4" 8 (for mini-itx)
4 (for 3.5")
12.1" 10
15" 14
17" 14
19" 14
21.5" 14



Installation Steps

Step 1
Make a cutout on the fixture (ex. wall) according to the cutout dimension of the Panel PC.
Note: All installation processes are done from the rear side of the fixture.


Make a cutout on the fixture (ex. wall) according to the cutout dimension of the Panel PC.

Step 2
Place the Panel PC on the fixture from the front side. The sides of the bezel should be visible from outside.


Place the Panel PC on the fixture from the front side. The sides of the bezel should be visible from outside.

Step 3
Use the mounting kit provided by Winmate to secure the Panel PC to the fixture. First, install the mounting clamp to the Panel PC, and then fasten the screw to fix the clamp to the fixture.


Use the mounting kit provided by Winmate to secure the Panel PC to the fixture. First, install the mounting clamp to the Panel PC, and then fasten the screw to fix the clamp to the fixture.

Step 4
Installation complete.


Installation complete.