RAM Mount

FM07

FM08

FM10 / FM12

	Note: In this example we use the FM07 series vehicle mounted computer as an example. Available installation methods may vary depending on your purchased model.
	Note: Some pictures in this guide are samples and can differ from actual product.

How to Mount your FM07 Vehicle Mounted Computer

Winmate recommends using RAM Mounting Parts as part of our device mounting solution. The below information is just a guideline on how you should mount the Winmate device using RAM Mount. To purchase the RAM parts, please follow the RAM Mounts Part Number and purchase from your preferred retailer.

Mounting 1 – No Drill Solution

No.	Component	RAM Mount Part Number	Description	QTY
A	RAM Clamp Mounts - on the forklift	RAM-D-247U-4	Clamp base with 2.25” Ball	1
B	RAM Arm	RAM-D-201U	Arm for 2.25” Ball(L: 8.375”)	1
C	RAM Ball on the device side	RAM-D-2461U	75x75mm VESA with 2.25” Ball	1
C-1	Screw	-	SUS304 M4 x 12mm Screw	4
C-2	Washer	-	M4 Washer	4

Mounting 2 - Drill Solution

Mounting 1 – No Drill Solution

No.	Component	RAM Mount Part Number	Description	QTY
A1	RAM round base mounts - on the forklift	RAM-D-202U	3.68" Round Base with 2.25" Ball	1
A1-1	Screw	-	SUS304 M8 x 40mm Screw	4
B	RAM Arm	RAM-D-201U	Arm for 2.25” Ball(L: 8.375”)	1
C	RAM Ball on the device side	RAM-D-2461U	75x75mm VESA with 2.25” Ball	1
C-1	Screw	-	SUS304 M4 x 12mm Screw	4
C-2	Washer	-	M4 Washer	4

Mounting 3 - Keyboard Mounting Installation

No.	Component	RAM Mount Part Number	Description	QTY
A	Winmate Keyboard Adapter Plate (designed by Winmate)	-	4 VESA Holes on the plate to device and 4 AMPS holes to RAM Ball	1
A-1	Screw	-	SUS304 M4 x 10mm Screw	4
A-2	Washer	-	M4 WASHER	4
B	RAM Ball on the sloped part of the keyboard adapter plate	RAM-D-202U	2.5" Round Base with 1.5" Ball	1
B-1	Screw	-	SUS304 M5 x 16 mm Screw	4
B-2	Washer	-	M5 Washer	4
C	RAM Ball on the bottom part of the keyboard adapter plate	RAM-D-202U	2.5" Round Base with 1.5” Ball	1
C-1	Screw	-	SUS304 M5 x 12 mm Screw	4
C-2	Washer	-	M5 Washer	4
D	RAM Arm	RAM-D-201U	Arm for 1.5" Ball (Length:5.6")	1
E	RAM Ball on the sloped part of the keyboard adapter plate	RAM-D-202U	2.5” Round Base with 1.5” Ball	1
E-1	Screw	-	SUS304 M5 x 12 mm Screw	4
E-2	Washer	-	M5 Washer	4
F	Keyboard	-	-	1

VESA Mount Installation

The rear cover of the FM07 supports VESA mount (75 x 75 mm).

Attach the VESA Plate to the rear cover of the FM07 using 4 x M4 mm Phillips screws
Follow instructions provided by VESA mount parts supplier.

VESA Mount Installation

Winmate does not supply VESA Mount parts.

	Note: In this example we use the FM08 series vehicle mounted computer as an example. Available installation methods may vary depending on your purchased model.
	Note: Some pictures in this guide are samples and can differ from actual product.

How to Mount your FM08 Vehicle-mount Computer

Mounting 1 – No Drill Solution

The docking of this device is designed to be mounted to RAM Mount solutions, which provides various types of mount types to fit any industrial use or vehicle. Each mounting kit consists of:

Mounting 1 – No Drill Solution

No.	Component	RAM Mount Part Number	Description	QTY
A	RAM Clamp Mounts - on the forklift	RAM-D-247U-4	Clamp base with 2.25” Ball	1
B	RAM Arm	RAM-D-201U	Arm for 2.25” Ball(L: 8.375”)	1
C	RAM Ball on the device side	RAM-D-2461U	75x75mm VESA with 2.25” Ball	1
C-1	Screw	-	SUS304 M5 x 12mm Screw	5
C-2	Washer	-	M5 Washer	5

Mounting 2 - Drill Solution

Mounting 1 – No Drill Solution

No.	Component	RAM Mount Part Number	Description	QTY
A1	RAM round base mounts - on the forklift	RAM-D-202U	3.68" Round Base with 2.25" Ball	1
A1-1	Screw	-	SUS304 M8 x 40mm Screw	5
B	RAM Arm	RAM-D-201U	Arm for 2.25” Ball(L: 8.375”)	1
C	RAM Ball on the device side	RAM-D-2461U	75x75mm VESA with 2.25” Ball	1
C-1	Screw	-	SUS304 M5 x 12mm Screw	5
C-2	Washer	-	M5 Washer	5

Mounting 3 - Keyboard Mounting Installation

No.	Component	RAM Mount Part Number	Description	QTY
D	Winmate Keyboard adapter plate (designed by Winmate)	-	4 VESA Holes on the plate to device and 4 AMPS holes to RAM Ball	1
D-1	Screw	-	SUS304 M5 x 20mm Screw	5
D-2	Washer	-	M5 WASHER	5
E	RAM Ball on the sloped part of the keyboard adapter plate	RAM-D-202U	2.5" Round Base with 1.5" Ball	1
E-1	Screw	-	SUS304 M4 x 14mm Screw	5
E-2	Washer	-	M4 WASHER	5
F	RAM Arm	RAM-D-201U	Arm for 1.5" Ball (Length: 5.6")	1
G	RAM Ball on the sloped part of the keyboard adapter plate	RAM-D-202U	2.5" Round Base with 1.5" Ball	1

RAM Mount parts may be ordered individually through RAM Mount.

	Note: In this example we use the FM10 / FM 12 series vehicle mounted computer as an example. Available installation methods may vary depending on your purchased model.
	Note: Some pictures in this guide are samples and can differ from actual product.

How to Mount your FM10 / FM 12 Vehicle-mount Computer

Mounting 1 – No Drill Solution

The docking of this device is designed to be mounted to RAM Mount solutions, which provides various types of mount types to fit any industrial use or vehicle. Each mounting kit consists of:

Mounting 1 – No Drill Solution

No.	Component	RAM Mount Part Number	Description	QTY
A	RAM Clamp Mounts - on the forklift	RAM-D-247U-4	Clamp base with 2.25” Ball	1
B	RAM Arm	RAM-D-201U	Arm for 2.25” Ball(L: 8.375”)	1
C	RAM Ball on the device side	RAM-D-2461U	75x75mm VESA with 2.25” Ball	1
C-1	Screw	-	SUS304 M5 x 12mm Screw	5
C-2	Washer	-	M5 Washer	5

Mounting 2 - Drill Solution

No.	Component	RAM Mount Part Number	Description	QTY
A1	RAM round base mounts - on the forklift	RAM-D-202U	3.68" Round Base with 2.25" Ball	1
A1-1	Screw	-	SUS304 M8 x 40mm Screw	5
B	RAM Arm	RAM-D-201U	Arm for 2.25” Ball(L: 8.375”)	1
C	RAM Ball on the device side	RAM-D-2461U	75x75mm VESA with 2.25” Ball	1
C-1	Screw	-	SUS304 M5 x 12mm Screw	5
C-2	Washer	-	M5 Washer	5

Mounting 3 - Keyboard Mounting Installation

No.	Component	RAM Mount Part Number	Description	QTY
D	Winmate Keyboard adapter plate (designed by Winmate)	-	4 VESA Holes on the plate to device and 4 AMPS holes to RAM Ball	1
D-1	Screw	-	SUS304 M5 x 20mm Screw	5
D-2	Washer	-	M5 WASHER	5
E	RAM Ball on the sloped part of the keyboard adapter plate	RAM-D-202U	2.5" Round Base with 1.5" Ball	1
E-1	Screw	-	SUS304 M4 x 14mm Screw	5
E-2	Washer	-	M4 WASHER	5
F	RAM Arm	RAM-D-201U	Arm for 1.5" Ball (Length: 5.6")	1
G	RAM Ball on the sloped part of the keyboard adapter plate	RAM-D-202U	2.5" Round Base with 1.5" Ball	1

RAM Mount parts may be ordered individually through RAM Mount.

Return Mounting

Solutions & Success Stories

Corporate

Support

Contact Us

News & Events

RAM Mount

How to Mount your FM07 Vehicle Mounted Computer

Mounting 1 – No Drill Solution

Mounting 2 - Drill Solution

Mounting 3 - Keyboard Mounting Installation

VESA Mount Installation

How to Mount your FM08 Vehicle-mount Computer

Mounting 1 – No Drill Solution

Mounting 2 - Drill Solution

Mounting 3 - Keyboard Mounting Installation

How to Mount your FM10 / FM 12 Vehicle-mount Computer

Mounting 1 – No Drill Solution

Mounting 2 - Drill Solution

Mounting 3 - Keyboard Mounting Installation

COMPARED PRODUCT

Learn More

INQUIRY PRODUCT

RAM Mount

How to Mount your FM07 Vehicle Mounted Computer

Mounting 1 – No Drill Solution

Mounting 2 - Drill Solution

Mounting 3 - Keyboard Mounting Installation

VESA Mount Installation

How to Mount your FM08 Vehicle-mount Computer

Mounting 1 – No Drill Solution

Mounting 2 - Drill Solution

Mounting 3 - Keyboard Mounting Installation

How to Mount your FM10 / FM 12 Vehicle-mount Computer

Mounting 1 – No Drill Solution

Mounting 2 - Drill Solution

Mounting 3 - Keyboard Mounting Installation