Rear mounting allows mounting a device from the rear side. The device is secured by bracket from both sides or top and bottom depending on the application.
A. Provide by Winmate
|1||Rear mount LCD x 1|
|2||Bracket x 2|
|3||Screws x 10 (M4 x 4mm)|
B. Prepare by yourself
|1||Screwsdriver x 1|
|2||M4 Screws x 6|
|3||Cut out Area
(Cut out a hole according to the product spec you buy from Winmate)
Installation Step & Application
Screw the brackets on both sides of your LCD mechanics.
Secure the display from the back side of your mechanics, so the outer frame can be covered to ensure the safety of your display.
Make sure your screws are tight and on the right position.
- Automatic Identification System (AIS)
- Monitoring / Surveillance System