Maritime Certification Capability
All Winmate's RUGGMATE Marine Grade products are designed and carried out applicable tests according to : |
---|
IEC60945 (Fourth Edition, Aug 2002) ![]() |

DET NORSKE VERITAS (DNV), one of the leading the ship classification societies, is an autonomous and independent foundation for safeguarding life, property and the environment in maritime environment including sea and onshore.
Getting DNV type approval making sure the products meet a set of requirement through design, manufacture, and operation. DNV undertakes the marine certification to make verification for the productto fit in different kind of maritime applications.
For more detail information about DNV services, found on DNV website at
Standards for Certification
DNV classifies tests in four levels base on the product applied location in ships-A, B, C, and D. For worseharsh environment use, the much strict standard testing is required. (See Table of Location Classes Selection Guide) Standards for Certification including contain principles, acceptance criteria and practical information related to the Society's consideration of objects, personnel, organizations, services and operations. A list of Standards for Certification is found in the latest edition of Pt.0 Ch.1 of the "Rules for Classification of Ships" and the "Rules for Classification of High Speed, Light Craft and Naval Surface Craft"
Table of Location Classes Selection guide
Column I | Column II | |||||
---|---|---|---|---|---|---|
Parameters | Location within main area | MAIN AREAS ON BOARD | ||||
Machinery spaces |
Control room, Accommodation |
Bridge | Pump room, Holds, Rooms with no heating |
Open Deck | ||
Temperature | Inside cubicles, desks, etc. with temperature rise of 5°C or more |
B | B | B | D | D |
All other locations | A | A | A | C | D | |
Humidity | Locations where special precautions are taken to avoid condensation |
A | A | A | A | A |
All other locations | B | B | B | B | B | |
Vibration | On machinery such as internal combustion engines, compressors, pumps, including piping on such machinery |
B | — | — | B | B |
Masts | — | — | — | — | C | |
All other locations | A | A | A | A | A | |
EMC Electromagnetic compatibility |
All locations within specified main Areas |
A | A | B | A | B |
Enclosure | Submerged application | D | — | — | D | D |
Below floor plates in engine room | C | — | — | — | — | |
All other locations | B | A | A | B | C |
DNV certification below or browse our website to get more details about this test report.

You may refer to the above certification details. You can see our products are certified to be used in the areas of Machinery spaces, Control room, accommodation, Bridge area. The tests are carried out according to Standard for Certification No. 2.4, April, 2006, also covering IACS Unified Requirements E10 Rev.5. The units also tested as protected equipment according to relevant parts of IEC 60945, 4th edition, also the Marine Equipment Derivatives. (MED)
Maritime Certification test




